How to
Setting Up an NTRIP Connection
Last Updated: 30/10/2025This guide will walk you through the step-by-step process of establishing an NTRIP (Networked Transport of RTCM via Internet Protocol) connection in Geolantis software to achieve centimeter-level RTK accuracy for your GNSS surveying work. What is NTRIP? NTRIP enables real-time distribution of RTK correction data via the internet, allowing your GNSS receiver to achieve high-precision...
Continue a Line in the Field
Last Updated: 23/09/2025Introduction While working in the field, interruptions happen—whether it’s a short break or the end of the day. If you didn’t finish your linework, don’t worry! You can always continue where you left off.Here’s a short tutorial on how to do that. Video Step-by-Step Workflow Additional InfoThis tutorial describes the workflow using GNSS hardware.The same...
Find a Point with GNSS Antenna or Locator
Last Updated: 06/08/2025Staking out or “locating” a point works similarly with a GNSS antenna and a locator that has GNSS integration. Video Instructions 1. Select a Project 2. Push the BT (Bluetooth) Icon 3. Push the Phone Icon and Connect to NTRIP Caster 4. Verify RTK-Fixed Status 5. Select the Point to Find / Stake Out 6....
Set up Mock-Location
Last Updated: 21/07/2025Geolantis.360 supports most GNSS antennas through Android’s mock location. This provides position in WGS84 and accuracy (no raw GNSS data is stored during data collection). Instructions 1. Install and Configure GNSS Companion App 2. Prepare Your Android Device 3. Install and Configure Geolantis.360 4. Sync Location Data
Create a new Project in the App
Last Updated: 16/07/2025This function is not enabled by default.To activate it, please contact [email protected] or raise a ticket through our support system. Video Tutorial Instruction
Auto-Numbering
Last Updated: 14/08/2025Instructions 1. Create or Select a Feature Class 2. Navigate to the Attributes Tab 3. Create a New Attribute Value 4. Set Type to Auto-Numbering 5. Configure Input Mode 6. Save & Close 7. View Auto-Numbering in Attributes Supported Variables Variable Description {User} Current user (you are logged in) {ProjectName} Project name {FeatureClassCounter} Counter for...