Locator
How to pair your RD8200SG with Geolantis.360 via BLE
Last Updated: 02/10/2025Check if ready & set your RD8200SG Locator to Bluetooth Low Energy (BLE) Connection Video Instructions
Check if ready & set your RD8200SG Locator to Bluetooth Low Energy (BLE) Connection
Last Updated: 29/07/2025Follow these steps to verify that your RD8200SG Locator supports BLE functionality. Instructions Now your RD8200SG is ready to be paired via BLE directly in Geolantis.360Connect your device – Geolantis.360 Knowledgebase Firmware Upgrade Please update your device to the latest firmware if you’re using an older version. Follow the instructions from RadiodetectionUpdating your locator firmware – Radiodetection Support
How to pair RD8200SG
Last Updated: 09/07/2025This is the Quickstart guide for the RD8200SG This guide is a quickstart guide to collect data with the RD8200SG. Survey Measurements The RD8200SG locator is capable of recording survey measurements and sending them to an external device using Bluetooth. It is important to make sure that the locator settings are set correctly for sending...
How to pair vLoc3 RTK pro
Last Updated: 10/07/2025Instructions 1. Forget all BT connection on vLoc and tablet 2. Start BT pairing/searching on vLoc If BT not shown – restart Choose internal BT on vLoc 3. Select a project and go to the settings 4. Under settings, go to Geolantis360 device connections 5. Choose vLoc3 on GPS (no device on locator only GPS...