Staking out or “locating” a point works similarly with a GNSS antenna and a locator that has GNSS integration.
Video #
Instructions #
1. Select a Project #
- Open Geolantis.360 app and choose the relevant project from your list.
2. Push the BT (Bluetooth) Icon #
- Connect Locator (if using)
- Connect GPS
3. Push the Phone Icon and Connect to NTRIP Caster #
- Connect and wait for confirmation.
4. Verify RTK-Fixed Status #
- Once connected, the system should display RTK-fixed status.
- This means your GNSS receiver is receiving real-time corrections and is ready for high-precision work.
5. Select the Point to Find / Stake Out #
- Navigate to the map or the object-search.
- Choose the target point you want to locate.
6. Push the Ruler Button #
- This activates the staking mode.
7. Link Measurement to GNSS Device / Locator #
- Tap the linkage button to bind the measurement tool to your GNSS device.
- Confirm that the linkage is successful.
8. Follow the Directions #
- The app will guide you to the point.
- In the upper left corner, you’ll see:
- Direct distance to the target
- North/East distance to the target
- Height difference to the target