This is the Quickstart guide for the RD8200SG #
This guide is a quickstart guide to collect data with the RD8200SG.
Survey Measurements #
The RD8200SG locator is capable of recording survey measurements and sending them to an external device using Bluetooth. It is important to make sure that the locator settings are set correctly for sending Survey Measurements, compatibility with mobile apps and use of the internal GNSS antenna
First start #
Check locator settings and send Survey Measurements #
The settings on the RD8200SG locator should be correct, but it is worth checking the following settings:
- Ensure your paired device is switched on and running a compatible app, for Android.
- Check SMLOG COM is ON: SMLOG > COM > ON.
- Check SMLOG PROT is set to ASCII 2: SMLOG > PROT > ASCII > 2.
- Check GPS is ON: SMLOG > PROT > ASCII > GPS+ > YES.
- Check RTK is ON: GPS > RTK > ON.
- Check MAG_H is ON: INFO > MAG-H > ON.
- Press the Survey key to store and send Survey Measurement to external device.
Working with Geolantis360 #
Configuring NTRIP #
Open a project #
#
Connect the RD8200SG #
Locating & Mapping in connection with the RD8200SG #
