1. Start within a project in Geolantis.360.
2. Tap the Settings icon (top right corner).
3. Enable the “NMEA Bluetooth device” checkbox.
4. Set the pole height correctly.
5. Open Device Connections.
6. Under GPS dropdown, select RD8200SG.
7. Press the BLE button.
8. Search and select the active device.
9. Repeat the same steps under the Locator dropdown.
10. Tap Save to store all connections.

---

Connection Confirmation #

• The Bluetooth icon will turn green when connected.
• You’ll see the device name and accuracy in the bottom status bar.

---

Start NTRIP Connection #

• Tap the phone icon to initiate NTRIP.
• When highlighted green, you’re ready to collect data.

---

Survey & Data Collection #

• Tap the Survey button to choose a feature class.
• Press the Survey Measurement button on the RD8200SG to collect data.

1. Start within a project in Geolantis.360.
2. Tap the Settings icon (top right corner).
3. Go to Devices > Enhanced BT/BLE Connections.
4. Set the pole height correctly.
5. Tap the Bluetooth symbol on the Collector screen, then go to Settings.
6. In the GPS selection, choose RD8200SG.
7. Press the BLE button.
8. Search and select the active device.
9. Repeat the same steps in the Locator selection.
10. Tap Close to save and exit.

---

Connection Confirmation (Both Platforms) #

• The Bluetooth icon turns green when connected.
• Device name and accuracy appear when clicking on the green pin at the bottom left corner.

---

Start NTRIP Connection #

• Tap the phone icon to initiate NTRIP.
• When highlighted green, you’re ready to collect data.

---

Survey & Data Collection #

• Tap the Survey button to choose a feature class.
• Press the Survey Measurement button on the RD8200SG to collect data.